ZNAČAJKE I SPECIFIKACIJA:
Key Features
-
Eight input channels with individual level and pan controls
-
Pan controls place each input mono signal anywhere in the output stereo image
-
Balanced microphone XLR or unbalanced 1/4-inch TS inputs on each channel
-
Full +48V low noise phantom power switchable for each microphone input
-
Balanced left and right 1/4-inch TRS main output jacks with master level control
-
Prefade Output jacks and Aux Bus Input jacks allow units to be chained to provide extra inputs
-
Each line input jack may be individually converted to a direct line output by means of internal jumpers
-
Rugged 1U rack-mount steel chassis with built-in power supply
-
Perfect for stage, studio and permanent installations
Specifications
|
Input Connections |
XLR female balanced (Mic, channels 1-8)
1/4-inch TS unbalanced (Line, channels 1-8)
RCA unbalanced (Aux Bus In, Left and Right) |
|
Output Connections |
1/4-inch TRS balanced (Main Outputs, Left and Right)
RCA unbalanced (Prefade Out, Left and Right) |
|
Input Impedance |
2k Ω (Mic), 20k Ω (Line), 51k Ω (Aux Bus In) |
|
Output Impedance |
200 Ω (Main Outputs, balanced),
100 Ω (Prefade Out) |
|
Frequency Response |
20 Hz – 20 kHz (+0, -1 dB) (CH 1-8 in, M |
|
Total Harmonic Distortion |
<0.01% @ 1 kHz, typical |
|
Phase Response |
All connections are phase coherent |
|
Signal to Noise Ratio |
>99dB typical (Ref 0dBu) |
|
CMRR |
>43 dB typical |
|
Maximum Input Level |
-4 dBu (Mic), +22 dBu (Line) |
|
Maximum Output Level |
+24 dBu (balanced), +18 dBu (unbalanced) |
|
Maximum Gain |
54 dB (Mic), 29 dB (Line) |
|
Phantom Power |
Switch Selectable, +48V DC (regulated and filtered), 7 mA current limiting per leg |
|
Power Requirements |
USA: 95-125 VAC, 50-60 Hz, <15W |
|
Dimensions |
1.75″ x 19″ x 6″ (4.5cm x 48.3cm x 15.2cm) |
|
Weight |
6.3 lbs (2.9 kg) |