SPECIFIKACIJE:
-
This sensitive and selective DSP-based (SDR) receiver has extended band coverage down to 64MHz.
-
Easy front-panel setup uses jog-wheel menu navigation with a large LCD display. Accurate, hi-res metering shows RF signal and audio levels; critical system menus are hidden.
-
Front-panel display of most-essential RDS/RBDS information including RT+ ‘tagging’ data.
-
Balanced analog and AES-digital program line outputs are available simultaneously; levels are independently adjustable.
-
Flashing-red front-panel alarms and rear-panel ‘tallies’ indicate RDS Loss or PI Error, Low Signal and Audio Program Loss.
-
All receiver setup parameters are held in non-volatile memory.
-
When issued, free firmware updates are easily installed in the field.
The (XLR) input accepts AES3 digital audio feeds at any sample rate between 22.05kHz and 192kHz.
Internal Sampling Rate Converter
The INOmini 300 may be set so that the three outputs follow the input sampling rate, or the outputs may be set (in common) at 22.05kHz, 24kHz, 32kHz, 44.1 kHz, 48kHz, 96kHz, or 192kHz.
AES3 Digital Outputs
Three independent (XLR) outputs deliver transformer-isolated digital audio at the common chosen sampling rate, and with ±30dB of audio level adjustment over each output independently.
Headphone Jack
A front-panel (TRS) 3.5mm jack monitors the digital audio program.
Mounting Options
An optional rack adapter mounts one, two or three INOmini format units in a standard 19-inch, 1U rack space.
Power Requirement
12VDC at 200mA (2.1mm x 5.5mm coaxial); inline switchmode power supply included.
Size and Weight
1.6”H x 5.5’W x 5.5”0; 4 lbs shipping weight
Environmental
Continuous operation at ambient temperatures between 32ºF/0ºC and 122ºF/50ºC; 0-95% relative humidity, non-condensing, altitudes to 10,000ft/3,048m.