Phonitor is a success story. Designed and developed for the sound engineer to be able to mix on headphones Phonitor soon found a fan base among Hi-Fi aficionados around the world as they realized that they can enjoy 'their' music on headphones the way it was intended – without the super-stereo effect and with natural crosstalk.
For us it was only logical to develop optimized Hi-Fi versions for those who enjoy listening to music on headphones.
In contrast to the Phonitor x the Phonitor xe renounces the preamplifier function and unlike the Phonitor e it features the nice VU meters and the fully featured Phonitor Matrix.
Thus the Phonitor xe is the flagship amplifier for headphone enthusiasts.
SPECIFIKACIJE:
ANALOGNI ULAZI:
XLR Input
-
Neutrik XLR, balanced, Pin 2 = (+)
-
Impedance: ca. 20 kohms
-
CMR: -82 dBu (at 1 kHz)
-
Max. Input Level: +32.5 dBu
DIGITALNI ULAZI (DODATNO):
-
Coaxial SPDIF (RCA) - sample rates PCM (kHz): 44.1, 48, 88.2, 96, 176.4, 192
-
Optical TOSLINK (F06) – sample rates PCM (kHz): 44.1, 48, 88.2, 96
-
USB (B) – PCM sample rates (kHz): 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 705.6, 768
-
USB (B) – DSD 1, 2 and 4 (DoP)
-
AES – sample rates PCM (kHz): 44.1, 48, 88.2, 96, 176.4, 192
BALANSIRANI IZLAZI ZA SLUŠALICE:
-
Neutrik 4-pin XLR connector
-
Pin wiring: 1= L (+), 2= L (-), 3= R (+), 4= R (-)
-
Impedance: 0.36 ohms
-
Damping Factor: 180 @ 40 ohms
-
Frequency Range: 10 Hz to 300 kHz ( -3 dB)
-
Crosstalk at 1kHz: -90 dB
-
THD & N: 0.00082 % (at 0 dBu, 1kHz, 100 kohms load)
-
Noise (A-weighted): -98 dBu
-
Dynamic Range: 130.5 dB
NEBALANSIRANI IZLAZI ZA SLUŠALICE:
-
6.35 mm TRS connector
-
Pin wiring: Tip = Left, Ring = Right, Sleeve = GND
-
Impedance: 0.18 ohm
-
Attenuation Factor: 180 @ 40 ohms
-
Frequency Range: 10 Hz to 300 kHz ( -3 dB)
-
Crosstalk at 1kHz: -90 dB
-
THD & N: 0.00082% (at 0 dBu, 1 kHz, 100 kohms load)
-
Noise (A-weighted): -103 dB
-
Dynamic Range: 135.5 dB
MAKSIMALNA IZLAZNA SNAGA (at +30 dBu @ 1 kHz):
-
2 x 1 W at 600 Ohm impedance
-
2 x 2 W at 300 Ohm impedance
-
2x 3.7 W at 120 Ohm impedance
-
2x 2.9 W at 47 Ohm impedance
-
2x 2.7 W at 32 Ohm impedance
NAPAJANJE:
-
Mains voltage (switchable): 230 V AC / 50 Hz or 115 V AC / 60 Hz
-
Fuses: 230 V: T 500 mA; 115 V: T 1 A
-
Power consumption: max 40 VA
-
Stand-by power consumption: 0.7 W
DIMENZIJE (zajedno s nožicama):
TEŽINA:
-
11.24 lbs (5,1 kg), unit only
-
13.78 lbs (6,25 kg), shipping